• <input id="auqqe"><tt id="auqqe"></tt></input>
  •  English > Products > Telecom Operation&Testing > Optical Power Meter > ST007 Fiber &Copper Cable Tester

    InformationParametersDownloads
    Information

    Main functions and key features:

      1. Multi-wavelength precise measurement.

      2. Absolute power measurement of dBm or xW.

      3. Relative power measurement of dB.

      4. Auto off function.

      5. LCD backlight display.

      6. Auto off LCD backlight display function.

      7. Test and show the battery voltage.

      8. Design for test low voltage, low voltage power off function.

      9. Check line sequence function.

      10. Cable tracking function: it can quickly find the needed line among many disordered lines. When switchboard is with weak electricity, it can also check the line.

     

    Parameters

    General specifications

    Auto shut off

    10 minutes

    Auto close backlight

    10 seconds

    Working temperature

    0℃~ +40℃

    Storage temperature -10℃~ +40℃

    Weight (g)

    220

    Dimension (mm)

    160*76*28mm

    Battery

    3.7V/620mAh rechargeable Li battery

    Relative humidity

     20%~75%(Non-condensation)

    Optical power meter module

    Wavelength range (nm) 800~1700
    Detector type InGaAs
    Measurement range (dBm) -50~+26, -70~+10
    Uncertainty ±5%
    Resolution 0.01 dBm

     Adapters

    FC, ST, SC

    Visual  fault locator module

    VFL

    FP-LD

    Wavelength

    650nm±20nm

    Output power

    1mw/3mw/5mw/10mw (optional)

    Connector

    2.5mm universal adapter(SC, FC, ST)

    Working mode

    CW or 2Hz modulation

    Applicable fiber

    SM / MM

    Check line sequence  module

    Function

    Support generate network line signal to view the network check line sequence with the receiver.

    Feature

    Easy to operate: determine the line sequence by receiving side lights order

    Cable tracking  module

    Test cable type

    Network cable, twisted pair cable, telephone line, USB cable, coaxial cable.

    Line status test

    Determine open or short circuit

    Voltage polarity detection

    Positive and negative of DC voltage

    Distance of signal transmission

    No less than 3km

    DC Voltage

    No more than 48V

     

    Downloads
    最全影音先锋AV